Commission Implementing Decision (EU) 2024/2764 of 30 October 2024 amending Implementing Decision (EU) 2023/2723 as regards harmonised standards for Edison screw lampholders, boxes and enclosures for electrical accessories, stationary circulation pumps, toilet appliances and electric vehicle conductive charging system

Official Journal EN of the European Union L series 2024/2764 31.10.2024 COMMISSION IMPLEMENTING DECISION (EU) 2024/2764 of 30 October 2024 amending Implementing Decision (EU) 2023/2723 as regards harmonised standards for Edison screw lampholders, boxes and enclosures for electrical accessories, stationary circulation pumps, toilet appliances and electric vehicle conductive charging system (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council(1), and in particular Article 10(6) thereof,

Whereas:

(1) In accordance with Article 12 of Directive 2014/35/EU of the European Parliament and of the Council(2), electrical equipment which is in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, is to be presumed to be in conformity with the safety objectives referred to in Article 3 of that Directive and set out in Annex I to that Directive, covered by those harmonised standards or parts thereof.

(2) By letter M/511 of 8 November 2012, the Commission made a request to the European Committee for Standardisation (CEN), the European Committee for Electrotechnical Standardisation (Cenelec) and the European Telecommunications Standards Institute (ETSI) for providing the first full list of the titles of harmonised standards and for the drafting, revision and the completion of harmonised standards, for electrical equipment designed for use within certain voltage limits in support of Directive 2014/35/EU (‘the request’). The safety objectives referred to in Article 3 of Directive 2014/35/EU and set out in Annex I to that Directive have not changed since the request was made to CEN, Cenelec and ETSI.

(3) On the basis of the request, Cenelec revised the harmonised standard EN 60335-2-51:2003 as amended by EN 60335-2-51:2003/A1:2008 and EN 60335-2-51:2003/A2:2012 on particular requirements for stationary circulation pumps, the references of which are published in the Official Journal of the European Union by Commission Implementing Decision (EU) 2023/2723(3). This resulted in the adoption of harmonised standard EN IEC 60335-2-51:2023 as amended by EN IEC 60335-2-51:2023/A11:2023.

(4) Furthermore, on the basis of the request, Cenelec amended the following harmonised standards, the references of which are published in the Official Journal of the European Union by Implementing Decision (EU) 2023/2723:

EN IEC 60335-2-84:2021 as amended by EN IEC 60335-2-84:2021/A11:2021 on particular requirements for toilet appliances; EN 60670-21:2007 as amended by EN 60670-21:2007/A11:2023 on particular requirements for boxes and enclosures for electrical accessories and EN IEC 60238:2018 on Edison screw lampholders. This resulted

in the adoption of the following amending harmonised standards: EN IEC 60335-2-84:2021/A12:2023;

EN 60670-21:2007/A1:2023; EN IEC 60238:2018/A1:2018 and EN IEC 60238:2018/A2:2021.

(1) OJ L 316, 14.11.2012, p. 12, ELI: http://data.europa.eu/eli/reg/2012/1025/oj.

(2) Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (OJ L 96, 29.3.2014, p. 357, ELI: http://data.europa.eu/eli/dir/2014/35/oj).

(3) Commission Implementing Decision (EU) 2023/2723 of 6 December 2023 on harmonised standards for electrical equipment drafted in support of Directive 2014/35/EU of the European Parliament and of the Council (OJ L, 2023/2723, 13.12.2023, ELI: http://data.

europa.eu/eli/dec_impl/2023/2723/oj).

ELI: http://data.europa.eu/eli/dec_impl/2024/2764/oj 1/4EN OJ L, 31.10.2024

(5) The Commission, together with Cenelec, has assessed whether the standards and amendments thereto, drafted by Cenelec, comply with the request.

(6) The following harmonised standards and the amendments thereto satisfy the safety objectives which they aim to cover and which are set out in Directive 2014/35/EU: EN IEC 60335-2-51:2023 as amended by EN IEC 60335-2-51:2023/A11:2023; EN IEC 60335-2-84:2021 as amended by EN IEC 60335-2-84:2021/ A11:2021 and EN IEC 60335-2-84:2021/A12:2023; EN 60670-21:2007 as amended by EN 60670-21:2007/ A11:2023 and EN 60670-21:2007/A1:2023; EN IEC 60238:2018 as amended by EN IEC 60238:2018/A1:2018 and EN IEC 60238:2018/A2:2021. It is therefore appropriate to publish the references of those standards and amendments thereto in the Official Journal of the European Union.

(7) Finally, Cenelec issued a correction to the harmonised standard EN IEC 61851-1:2019 on general requirements for electric vehicle conductive charging system, the reference of which is published in the Official Journal of the European Union by Implementing Decision (EU) 2023/2723. This resulted in the harmonised standard EN IEC 61851-1:2019 as corrected by EN IEC 61851-1:2019/AC:2023-12.

(8) The Commission, together with Cenelec has assessed whether the correction EN IEC 61851-1:2019/AC:2023-12 to the harmonised standard EN IEC 61851-1:2019 is indispensable for the correct application of it as a harmonised standard.

(9) The correction EN IEC 61851-1:2019/AC:2023-12 is indispensable for the correct application of EN IEC 61851-1:2019 as a harmonised standard. It is therefore appropriate to publish the reference of EN IEC 61851-1:2019 as corrected by EN IEC 61851-1:2019/AC:2023-12 in the Official Journal of the European Union.

(10) Implementing Decision (EU) 2023/2723 provides in Annex I thereto the references of harmonised standards conferring a presumption of conformity with Directive 2014/35/EU. In order to ensure that the references of harmonised standards drafted in support of Directive 2014/35/EU are listed in one act, the references of standards EN IEC 60238:2018, EN IEC 60335-2-51:2023, EN IEC 60335-2-84:2021 and EN 60670-21:2007 and of the amendments thereto and of standard EN IEC 61851-1:2019 and its correction should be included in that Annex.

(11) It is therefore necessary to withdraw from the Official Journal of the European Union the references of harmonised standards EN IEC 60238:2018, EN 60335-2-51:2003, EN IEC 60335-2-84:2021, EN 60670-21:2007 and EN IEC 61851-1:2019 together with any references of amending standards thereto published in the Official Journal of the European Union. It is therefore appropriate to delete those references from Annex I to Implementing Decision

(EU) 2023/2723.

(12) In order to give manufacturers sufficient time to adapt their electrical equipment that is covered by harmonised standards EN IEC 60238:2018; EN 60335-2-51:2003 as amended by EN 60335-2-51:2003/A1:2008 and EN 60335-2-51:2003/A2:2012; EN IEC 60335-2-84:2021 as amended by EN IEC 60335-2-84:2021/A11:2021; EN 60670-21:2007 as amended by EN 60670-21:2007/A11:2023; and EN IEC 61851-1:2019, it is necessary to defer the withdrawal of the references of those harmonised standards.

(13) Implementing Decision (EU) 2023/2723 should therefore be amended accordingly.

(14) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements, including the safety objectives, set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the day of its publication,

HAS ADOPTED THIS DECISION:

Article 1 Annex I to Implementing Decision (EU) 2023/2723 is amended in accordance with the Annex to this Decision.

2/4 ELI: http://data.europa.eu/eli/dec_impl/2024/2764/ojEN OJ L, 31.10.2024 Article 2 This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.

Point (1) of the Annex shall apply from 30 April 2026.

Done at Brussels, 30 October 2024.

For the Commission The President Ursula VON DER LEYEN

ELI: http://data.europa.eu/eli/dec_impl/2024/2764/oj 3/4EN OJ L, 31.10.2024 ANNEX Annex I to Implementing Decision (EU) 2023/2723 is amended as follows:

(1) rows 139, 198, 221, 299a, and 517 are deleted;

(2) the following rows are inserted in sequential order:

No Reference of the standard ‘139a. EN IEC 60238:2018 Edison screw lampholders EN IEC 60238:2018/A1:2018 EN IEC 60238:2018/A2:2021’; ‘198a. EN IEC 60335-2-51:2023 Household and similar electrical appliances – Safety – Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations EN IEC 60335-2-51:2023/A11:2023’;

‘221a. EN IEC 60335-2-84:2021 Household and similar electrical appliances – Safety – Part 2-84: Particular requirements for toilet appliances EN IEC 60335-2-84:2021/A11:2021 EN IEC 60335-2-84:2021/A12:2023’;

‘299b. EN 60670-21:2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 21:

Particular requirements for boxes and enclosures with provision for suspension means EN 60670-21:2007/A11:2023 EN 60670-21:2007/A1:2023’; ‘517a. EN IEC 61851-1:2019 Electric vehicle conductive charging system – Part 1: General requirements EN IEC 61851-1:2019/AC:2023-12’.

4/4 ELI: http://data.europa.eu/eli/dec_impl/2024/2764/oj