UN Regulation No 92 – Uniform provisions concerning the approval - 12th December 2025 - United Nations Economic Commission for Europe

Read or download the official PDF of this gazette notification issued by the United Nations Economic Commission for Europe on 12th December 2025.

Official Gazette Notification Text

Official Transcript

Official Journal EN of the European Union L series 2025/2463 12.12.2025 Only the original UN/ECE texts have legal effect under international public law. The status and date of entry into force of this Regulation should be checked in the latest version of the UN/ECE status document TRANS/WP.29/343, available at:https://unece.org/status-1958-agreement-and-annexed-regulations UN Regulation No 92 – Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (NORESS) for vehicles of categories L , L , L , L and L with regard to 1 2 3 4 5 sound emission [2025/2463]

Incorporating all valid text up to:

03 series of amendments – Date of entry into force: 26 September 2025 This document is meant purely as documentation tool. The authentic and legally binding texts are:

ECE/TRANS/WP.29/2019/7 ECE/TRANS/WP.29/2025/3 CONTENTS Regulation

1. Scope

2. Definitions

3. Application for approval

4. Markings

5. Approval

6. Specifications

7. Modification and extension of the approval of NORESS and extension of approval

8. Conformity of production

9. Penalties for non-conformity of production

10. Production definitively discontinued

11. Names and addresses of Technical Services responsible for conducting approval tests, and of Type Approval Authorities

12. Transitional provisions Annexes 1 Communication 2 Example of the approval marks 3 Requirements for fibrous absorbent materials used in NORESS 4 Statement of Compliance with the Additional Sound Emission Provisions 5 Anti-tampering provisions

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 1/23EN OJ L, 12.12.2025

1. Scope This UN Regulation applies to non-original replacement exhaust silencing systems for vehicles of categories L , 1 L , L , L and L (1).

2 3 4 5

2. Definitions For the purpose of this UN Regulation

2.1. ‘Non-original replacement exhaust silencing system or components of this system’ means a system of a type different from that fitted to the vehicle on approval or extension of approval. It may be used only as a replacement exhaust or silencing system.

The acronym NORESS denotes the non-original replacement exhaust silencing system.

2.2. ‘Non-original replacement exhaust silencing system component’means one of the various components which together form the exhaust silencing system(2).

2.3. ‘Non-original replacement exhaust silencing systems of different types’ means silencing systems which differ

significantly in such respects as:

(a) Their components bear different trade names or marks,

(b) The characteristics of the materials constituting a component are different or the components differ in shape or size; a modification in respect to coating (zinc coating, aluminium coating, etc.) is not considered a change of type,

(d) Their components are combined differently.

2.4. ‘Non-original replacement exhaust silencing system (NORESS) or component thereof’ means any part of the exhaust silencing system defined in paragraph 2.1 intended for use on a vehicle other than a part of the type fitted to the vehicle when submitted for type approval pursuant to UN Regulation No 9, UN Regulation No 41 or UN Regulation No 63.

2.5. ‘Approval of a NORESS or component(s) thereof’means the approval of the whole or a part of a silencing system adaptable to one or several specified types of vehicle, falling under the scope of this UN Regulation, as regards the limitation of their sound level.

2.6. ‘Vehicle type’means vehicles, falling under the scope of this UN Regulation, which do not differ in such essential

respects as:

(a) The type of engine (two-stroke or four-stroke with reciprocating or rotary pistons; number and capacity of cylinders; number and type of carburettors or injection systems; arrangement of valves; maximum net power and corresponding engine speed). For rotary piston engines, the cubic capacity should be taken to be double of the volume of the chamber;

(b) Drive train, in particular the number and ratios of the gears of the transmission and the final ratio;

2.7. ‘Rated engine speed’ means the engine speed at which the engine develops its rated maximum net power as stated by the manufacturer(3).

The symbol n , denotes the numerical value of the rated engine speed expressed in revolutions per minute. rated

(1) As defined in the Consolidated Resolution on the Construction of Vehicles (R.E.3.) (ECE/TRANS/WP.29/78/Rev.7, para. 2).

(2) Those components are, in particular, the exhaust manifold, the silencer proper, the expansion chamber and the resonator.

(3) If the rated maximum net power is reached at several engine speeds, the rated engine speed is used in this Regulation as the highest engine speed at which the rated maximum net power is reached.

2/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025

2.8. ‘Exit-cone’means the final part of the exhaust silencing system outlet through which exhaust gases exit into the air (see figure 1).

Figure 1 Exhaust silencer

2.9. ‘Exhaust casing’means the shell or main external assembly of the exhaust silencing system.

2.10. ‘Baffle’(commonly called ‘dB killer’) means the component of the exhaust silencing system that contributes to the attenuation of noise by restricting the flow of the exhaust gases exiting into the air.

2.11. ‘Fastener’means a device used to mechanically join two components.

2.12. ‘Tamper proofing’means the activity: — to hinder and deter unlawful modifications; and — to ease the detection of unlawful modifications.

2.13. ‘Tampering event’means any action which puts the exhaust silencing system into a state which is not any more compliant with the approved type.

2.14. ‘Irrecoverable damage (related to tampering exhaust silencing systems)’ means damage that constitutes permanent evidence of a tampering event.

3. Application for approval

3.1. The application for approval of a NORESS or components thereof shall be submitted by its manufacturer or by his duly accredited representative.

3.2. It shall be accompanied by the under mentioned documents in triplicate and the following particulars:

(a) A description of the vehicle type(s) on which the NORESS or components are intended to be fitted, with regard to the items referred to in paragraph 2.6 above. The numbers and/or symbols identifying the engine type and the vehicle type shall be specified and the vehicle type approval number, if necessary;

(b) A description of the complete NORESS showing the relative position of each of its components, together with instructions for their assembly;

(c) Detailed drawings of each NORESS component to enable it to be easily located and identified, and specification of the materials used. These drawings shall also indicate the location for the mandatory affixing of the approval number.

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 3/23EN OJ L, 12.12.2025

3.3. At the request of the Technical Service conducting the tests for approval, the manufacturer of the NORESS shall

submit:

(a) Two samples of the NORESS or its components submitted for approval;

(b) A sample of the original exhaust silencing system with which the vehicle was equipped when submitted for type approval;

(c) A test vehicle representative of the type to which the NORESS is to be fitted; this vehicle, when measured for sound emission according to the methods described in Annex 3 (including all relevant amendments) to UN Regulation No 9, UN Regulation No 41 or UN Regulation No 63 shall satisfy the following

conditions:

(i) If the vehicle is of a type for which approval has been issued pursuant to the requirements of each of UN Regulations Nos 9, 41 or 63:

(a) The sound level, during the test in motion shall not exceed the limit specified in the appropriate UN Regulation by more than 1 dB(A);

(b) The sound level during the stationary test shall not exceed by more than 3 dB(A), the level determined during the approval and indicated on the manufacturer’s plate.

(ii) If the vehicle is not of the type for which approval has been issued pursuant to the requirements of the appropriate UN Regulation, the sound level shall not exceed by more than 1 dB(A) the limit applicable at the time when it was first put on the road.

4. Markings

4.1. Each component of the NORESS, excluding pipes and fitting accessories, shall bear:

(a) The trade name or mark of the manufacturer of the NORESS or its components;

(b) The commercial designation given by the manufacturer.

4.2. These markings shall be clearly legible and indelible and also visible in the position at which the NORESS is fitted.

4.3. The NORESS shall be labelled by its manufacturer; indicating the type(s) of vehicle(s) for which it has been granted the approval.

4.4. A component may carry several approval numbers if it has been approved as a component of several replacement exhaust systems.

4.5. The replacement exhaust system shall be supplied in a packaging or carry a label both providing the following

particulars:

(a) The trade name or mark of the manufacturer of the replacement silencing system and its components,

(b) The address of the manufacturer or his representative,

4.6. The manufacturer shall provide:

(a) Instructions explaining in detail the correct method of mounting on the vehicle,

(b) Instructions for handling the silencing system,

(d) The approval mark.

4.7. The approval mark.

4/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025

5. Approval

5.1. If the NORESS or component thereof submitted for approval under this UN Regulation meets the requirements of paragraph 6 below, approval for that type shall be granted.

5.2. An approval number shall be assigned to each NORESS type approved. Its first two digits (at present 03 corresponding to the 03 series of amendments to the UN Regulation) shall indicate the series of amendments incorporating the most recent major technical amendments made to the Regulation at the time of issue of the approval. The same Contracting Party may not assign the same number to another type of NORESS or component designed for the same type(s) of vehicle.

5.3. Notice of approval or extension or refusal of approval of a NORESS or component thereof under this UN Regulation shall be communicated to the Parties to the Agreement which apply this UN Regulation, by means of a form conforming to the model in Annex 1 to this UN Regulation.

5.4. There shall be affixed to every NORESS and component thereof conforming to a type approved under this UN

Regulation an international approval mark consisting of:

(a) A circle surrounding the letter ‘E’ followed by the distinguishing number of the country which has granted approval(4);

(b) The number of this UN Regulation, followed by the letter ‘R’, a dash and the approval number to the right of the circle prescribed in (a) above;

5.5. The approval mark shall be easily legible when the NORESS is fitted to the vehicle, and shall be indelible.

5.6. A component may be marked with more than one approval number if it has been approved as a part of more than one NORESS; in this case the circle does not need to be repeated. Annex 2 to this Regulation gives an example of the approval mark.

6. Specifications

6.1. General specifications The silencer shall be designed, constructed and capable of being mounted so that:

(a) The vehicle complies with the requirements of this UN Regulation under normal conditions of use, and in particular regardless of any vibrations to which it may be subjected;

(b) It displays reasonable resistance to the corrosion to which it is exposed, with due regard to the normal conditions of use of the vehicle;

(c) The ground clearance provided by the silencer originally fitted, and the possible inclined position of the vehicle, are not reduced;

(d) Unduly high temperatures do not exist at the surface;

(e) Its edges are not sharp or jagged and there is sufficient space for shock absorbers and springs;

(f) Adequate clearance of spring parts is provided;

(g) Adequate safety clearance of pipes is provided;

(h) It is tamper-resistant in a way that is compatible with clearly-defined maintenance and installation requirements.

(4) The distinguishing numbers of the Contracting Parties to the 1958 Agreement are reproduced in Annex 3 to the Consolidated Resolution on the Construction of Vehicles (R.E.3) (ECE/TRANS/WP.29/78/Rev.7).

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 5/23EN OJ L, 12.12.2025

6.2. Specifications regarding sound levels:

The acoustic efficiency of the NORESS or components thereof shall be verified by means of the methods described in UN Regulations Nos 9, 41 or 63. In particular, for the application of this paragraph reference shall be made to the series of amendments to UN Regulation No 92 which was in force at the time of type approval of the new vehicle. When the NORESS or its components is fitted to the vehicle described in paragraph 3.3(c), the sound level values obtained using the two methods (stationary and vehicle in motion) shall satisfy the following

condition:

They shall not exceed either of the values measured in conformity with the requirements of paragraph 3.3(c), for the same vehicle when fitted with the original silencing system during the test with the vehicle in motion and during the stationary test.

6.3. Additional requirements

6.3.1. Tampering protection provisions The NORESS and its components shall be designed and constructed considering tamper proofing measures.

This is to prevent components that contribute to sound attenuation from being removed or rendered ineffective. Any tampering event shall cause irrecoverable damage to the assembly.

Software of the NORESS (if any) shall be designed and programmed considering tamper proofing measures.

At the request of the type-approval authority or its technical service, the manufacturer of the NORESS shall describe the tamper proofing measures applied and demonstrate their practical effectiveness.

Compliance with those anti-tampering provisions shall be ensured in any case. It does not depend on the year of production of the vehicle nor on the noise regulation under which the type approval of the vehicle for which the NORESS was designed was granted. Recommendation to comply with the anti-tampering provisions is

provided in Annex 5. For the assessment of designs and constructions that are not listed in that annex, the general principles of that annex still apply.

6.3.2. Multi-mode NORESS NORESS with multiple, manually or electronically adjustable, rider selectable operating modes shall meet all requirements in all operating modes. The reported sound levels shall be those resulting from the mode with the highest sound levels.

6.3.3. Prohibition of defeat devices The NORESS manufacturer shall not intentionally alter, adjust or introduce any device or procedure solely for the purpose of fulfilling the sound emission requirements of this UN Regulation, which will not be operational during typical on-road operation.

6.3.4. Additional sound emission provisions (ASEP)

6.3.4.1. The ASEP requirements shall also be fulfilled for the NORESS, if it is designed to be used on vehicles that are type approved according to a series of amendments to UN Regulation No 41, where ASEP was part of the issued type approval of the vehicle.

If ASEP has to be tested, these tests and necessary pre-tests have to be done in accordance with the series of amendments of UN Regulation No 41, which was the basis for the issued type approval of the vehicle.

6.3.4.2. If NORESS has different modes or variable geometries, it has to perform the ASEP tests of UN Regulation No 41 also, if it is designed to be used on vehicles that are type approved according to a series of amendments to UN Regulation No 41, where ASEP was not a part of the issued type approval of these vehicles.

These ASEP tests and necessary pre-tests have to be done in accordance with the actual series of amendments of the UN Regulation No 41, which is the actual base for issuing type approvals of these vehicles.

6/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025 The sound emission of the NORESS equipped vehicle under typical on-road driving conditions, which are different from those under which the type-approval test set out in Annex 3 and Annex 7 of UN Regulation No 41 were carried out, shall not deviate from the test result in a significant manner.

6.3.4.3. The ASEP tests regarding 6.3.4.2 shall be done in comparison on a vehicle, which is equipped with the original exhaust silencer and the NORESS (back-to-back-test). The ASEP tests of the vehicle equipped with the original exhaust silencer shall be done in normal operation mode for road use of the based sound emission approval of the vehicle. These test results build only the base of comparison with the ASEP test results of the NORESS equipped vehicle.

During these tests, the sound-pressure level of the NORESS for each test condition can have in its maximum the same sound-pressure level as the measurement of the vehicle equipped with the original exhaust silencer in its approved mode.

6.3.4.4. If tests regarding 6.3.4.1 or 6.3.4.2 are to be performed for NORESS without multiple, manually or electronically adjustable, rider selectable operating modes or without variable geometries, the vehicle as described in paragraph 3.3(c) shall be used.

6.3.4.5. If ASEP tests regarding 6.3.4.1 or 6.3.4.2 are to be performed for NORESS, which are equipped with multiple, manually or electronically adjustable, rider selectable operating modes or with variable geometries, each vehicle type of the range of approval application of the NORESS has to be tested in each selectable mode of the vehicle and the NORESS.

6.3.4.6. ASEP tests regarding 6.3.4.4 can be done by the manufacturer of the NORESS.

ASEP tests regarding 6.3.4.5 have to be performed by the Technical Service. The test results of these measurements of the original and the NORESS equipped vehicle, and all relevant data of these tests have to be mentioned into the test report of the Technical Service.

6.3.4.7. The Type Approval Authority may require any relevant test to verify the compliance of the NORESS to the above-mentioned requirements of paragraph 6.3.4.1 to 6.3.4.6. During these tests the type approval authority can also check the software of the steering units of the NORESS, which are equipped with multiple, electronically adjustable, rider selectable operating modes or with variable geometries.

6.3.4.8. The manufacturer shall provide in addition to the test report of the Technical Service a statement in conformity with Annex 4 of this UN Regulation that the NORESS or components to be approved comply with the additional sound emission provision requirements of the series of amendments to UN Regulation No 41.

In the case of NORESS which are equipped with multiple, manually or electronically adjustable, rider selectable operating modes or with variable geometries the manufacturer of the NORESS has to send the approval authority an additional document with detailed principle(s) and control of the NORESS in accordance to paragraph 6.3.4.9.

6.3.4.9. Additional documentation for NORESS equipped with multiple, manually or electronically adjustable, rider selectable operating modes or with variable geometries.

6.3.4.9.1. The additional documentation package required by paragraph 6.3.4.8 enabling the approval authority to evaluate the sound emission control strategy or strategies to ensure the correct operation of the NORESS shall

be made available in the two following parts:

(a) the ‘formal additional documentation package’ that may be made available to interested parties upon request;

(b) the ‘extended additional documentation package’ that shall remain strictly confidential.

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 7/23EN OJ L, 12.12.2025

6.3.4.9.2. The formal additional documentation package may be brief, provided that it exhibits evidence that all parameters to control the NORESS have been identified. The additional documentation shall describe the functional operation of the NORESS. This material shall be retained by the approval authority.

6.3.4.9.3. The extended additional documentation package shall include information on the operation of all Additional Sound Emission Strategies (ASES) and Base Sound Emission Strategy (BSES), including a description of the parameters that are modified by any ASES and the boundary conditions under which the ASES operate, and indication of which ASES and BSES are likely to be active under the conditions of the test procedures set out in the applicable ASEP requirement of UN Regulation No 41. The extended documentation package shall include all modes of operation.

The extended documentation package shall remain strictly confidential. This material shall be retained by the Type Approval Authority.

6.4. Measurement of vehicle performance

6.4.1. The NORESS or its components shall be such as to ensure that the vehicle’s performance is comparable with that achieved with the original exhaust silencing system or components thereof.

6.4.2. The NORESS or, at the manufacturer’s choice, the components thereof shall be compared with an original silencing system or components, also in new condition, successively fitted to the vehicle referred to in paragraph 3.3(c).

6.4.3. The verification shall be carried out by measuring the output curve in accordance with paragraph 6.4.1 or 6.4.2.

The maximum power and the engine speed at maximum power measured with the NORESS shall not exceed the net power and the engine speed measured under the conditions set out below with the original equipment exhaust system by more than ± 5 per cent.

6.4.4. Test method

6.4.4.1. Engine test method The measurements shall be carried out on the engine of the vehicle referred to in paragraph 3.3(c), the engine being mounted on a dynamometer.

6.4.4.2. Vehicle test method The measurements shall be carried out on the vehicle referred to in paragraph 3.3(c). The values obtained with the original silencing system shall be compared with those obtained with the NORESS. The test shall be conducted on a roller dynamometer.

6.5. Additional provisions regarding the NORESS or its components filled with fibrous materials The use of fibrous absorbent material shall be permitted in the construction of the NORESS only if the requirements in Annex 3 are met.

6.6. Evaluation of the emission of pollutants of vehicles equipped with replacement silencer system The vehicle referred to in paragraph 3.3(c) with the non-original replacement exhaust silencing system

(NORESS) of the type for which approval is requested, shall fulfil the pollution requirements according to the type approval of the vehicle. The evidence shall be documented in the test report.

8/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025

7. Modification and extension of the approval of NORESS and extension of approval

7.1. Every modification of the type of NORESS or its components shall be notified to the Type Approval Authority which approved the type of NORESS. The said Authority may then either:

(a) Consider that the modifications made are unlikely to have an appreciable adverse effect; or

(b) Require a further test report from the Technical Service responsible for conducting the tests.

7.2. The manufacturer of the NORESS or component thereof or his duly accredited representative may ask the Type Approval Authority which has granted the approval of the NORESS for one or several types of vehicle for an extension of the approval to other types of vehicle. The procedure shall be as described in paragraph 3 above.

7.3. Confirmation or refusal of approval, specifying the modifications, shall be communicated in accordance with the procedure specified in paragraph 5.3 above to the Contracting Parties to the Agreement applying this UN Regulation.

7.4. The competent authority issuing the extension of approval shall assign a series number to each communication form drawn up for such an extension.

8. Conformity of production The conformity of production procedures shall comply with those set out in the Agreement, Appendix 2 (E/ECE/324-E/ECE/TRANS/505/Rev.2), with the following requirements:

(a) The NORESS approved to this UN Regulation shall be so manufactured as to conform to the type approved by meeting the requirements set out in paragraph 6 above;

(b) The holder of the approval shall ensure that for each type of NORESS at least the tests prescribed in paragraph 6 of this UN Regulation are carried out;

(c) The authority which has granted type approval may at any time verify the conformity control methods applied in each production facility. The normal frequency of these verifications shall be once every two years;

(d) The production is considered to conform to the requirements of this UN Regulation, if the provisions of UN Regulations Nos 9, 41 and 63, corresponding to the type of vehicle, are complied with and if the sound level measured by the method described in the given UN Regulations during the test in motion does not exceed by more than 3 dB(A) the sound level measured during the type approval and does not exceed by more than 1 dB(A) the limits prescribed in UN Regulations Nos 9, 41 and 63 as applicable.

9. Penalties for non-conformity of production

9.1. The approval granted in respect of a type of NORESS or its components under this UN Regulation may be withdrawn if the requirements laid down in paragraph 8 above are not complied with, or if the NORESS or its components fail to pass the tests provided for in paragraph 8(b) above.

9.2. If a Contracting Party to the Agreement applying this UN Regulation withdraws an approval it has previously granted, it shall forthwith so notify the other Contracting Parties to the 1958 Agreement applying this UN Regulation, by means of a communication form conforming to the model contained in Annex 1 to this UN Regulation.

10. Production definitively discontinued If the holder of the approval completely ceases to manufacture a type of replacement silencing system or components thereof in accordance with this UN Regulation, he shall so inform the authority which granted the approval which shall in turn inform thereof the other Contracting Parties to the 1958 Agreement applying this UN Regulation, by means of a copy of the communication form conforming to the model contained in Annex 1 to this UN Regulation.

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 9/23EN OJ L, 12.12.2025

11. Names and addresses of Technical Services responsible for conducting approval tests, and of Type Approval Authorities The Contracting Parties to the 1958 Agreement which apply this UN Regulation shall communicate to the United Nations Secretariat the names and addresses of the Technical Services responsible for conducting approval tests and of the Type Approval Authorities which grant approval and to which forms certifying approval or extension or refusal or withdrawal of approval, or production definitively discontinued issued in other countries, are to be sent.

12. Transitional provisions

12.1. As from the official date of entry into force of the 03 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approvals under this Regulation as amended by the 03 series of amendments.

12.2. As from 24 months after the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall not be obliged to accept type approvals to the preceding series of amendments, first issued after 24 months after the date of entry into force of the 03 series of amendments.

12.3. As from 36 months after the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall not be obliged to accept type approvals issued to the preceding series of amendments to this Regulation (unless the equipment or part is intended as a replacement for fitting on vehicles in use and it is not technically feasible for the equipment or part in question to satisfy the new requirements contained in this Regulation as amended by the 03 series of amendments).

12.4. Until 36 months after the date of entry into force of the 03 series of amendments, Contracting Parties applying this Regulation shall accept type approvals issued according to the preceding series of amendments, first issued before 24 months after the date of entry into force of the 03 series of amendments.

10/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025 ANNEX 1 Communication PART A NORESS for vehicle types approved according to the 04 series of amendments to UN Regulation No 41 (Maximum format: A4 (210 × 297 mm))

issued by: Name of administration: .................................... .................................... .................................... () Concerning(2): Approval granted Approval extended Approval refused Approval withdrawn Production definitively discontinued of a vehicle type with regard to a type of NORESS or component there of pursuant to UN Regulation No 92.

Approval No..................................................Extension No..................................................

1. Trade name or mark of the vehicle: ...................................................................................

2. Vehicle type: ...........................................................................................................

3. Manufacturer’s name and address: ....................................................................................

4. If applicable, name and address of manufacturer’s representative: ....................................................

5. Engine

5.1. Manufacturer: .........................................................................................................

5.2. Type: ..................................................................................................................

5.3. Model: .................................................................................................................

5.4. Rated maximum net power: .......................................kW at .......................................min-1

5.5. Kind of engine (e.g. positive-ignition, compression ignition, etc.)(3): ..................................................

5.6. Cycles: two-stroke/four-stroke (2)

5.7. Cylinder capacity: .................................................................................................cm3

(1) Distinguishing number of the country which has granted/extended/refused/withdrawn an approval(see approval provisions in the Regulation).

(2) Delete what does not apply.

(3) If a non-conventional engine is used, this should be stated.

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 11/23EN OJ L, 12.12.2025

6. Transmission

6.1. Type of transmission: non-automatic gearbox/automatic gearbox: ...................................................

6.2. Number of gears: ......................................................................................................

7. Equipment

7.1. Exhaust silencer

7.1.1. Manufacturer or authorized representative (if any): ...................................................................

7.1.2. Model: .................................................................................................................

7.1.3. Type: ....................................... in accordance with drawing No. ........................................

7.2. Intake silencer

7.2.1. Manufacturer or authorized representative (if any): ...................................................................

7.2.2. Model: .................................................................................................................

7.2.3. Type: ....................................... in accordance with drawing No. ........................................

8. Gears used for test of motor cycle in motion: .........................................................................

9. Final drive ratio(s): ....................................................................................................

10. ECE type approval number of tyre(s): .................................................................................

If not available, the following information shall be provided:

10.1. Tyre manufacturer: ....................................................................................................

10.2. Commercial description(s) of the type of tyre (by axle) (e.g. trade name, speed index, load index): ...................

10.3. Tyre size (by axle): .....................................................................................................

10.4. Other type approval number (if available): ............................................................................

11. Masses

11.1. Maximum permissible gross weight: ...............................................................................kg

11.2. Test mass: ..........................................................................................................kg

11.3. Power to mass ratio index (PMR): .....................................................................................

12. Vehicle length: ..................................................................................................... m

12.1. Reference length l : ................................................................................................ m ref

13. Vehicle speeds of measurements in gear (i)

13.1. Vehicle speed at the beginning of the period of acceleration (average of 3 runs) for gear (i): ....................km/h 12/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025

13.2. Pre-acceleration length for gear (i): ................................................................................. m

13.3. Vehicle speed v (average of 3 runs) for gear (i): ................................................................km/h PP'

13.4. Vehicle speed v (average of 3 runs) for gear (i): ................................................................km/h BB'

14. Vehicle speeds of measurements in gear (i+1) (if applicable)

14.1. Vehicle speed at the beginning of the period of acceleration (average of 3 runs) for gear (i+1): .................km/h

14.2. Pre-acceleration length for gear (i+1): .............................................................................. m

14.3. Vehicle speed v (average of 3 runs) for gear (i+1): .............................................................km/h PP'

14.4. Vehicle speed v (average of 3 runs) for gear (i+1): .............................................................km/h BB'

15. Accelerations are calculated between lines AA' and BB'/PP' and BB'

15.1. Description of functionality of devices used to stabilize the acceleration (if applicable): ..............................

16. Sound levels of moving vehicle

16.1. Wide-open-throttle test result L : ..............................................................................db(A) wot

16.2. Constant speed test results L : ..................................................................................db(A) crs

16.3. Partial power factor k : ..............................................................................................-- p

16.4. Final test result L : ...........................................................................................db(A) urban

17. Sound level of stationary vehicle

17.1. Position and orientation of microphone (according to Appendix 2 of Annex 3 of 04 series of UN Regulation No 41): ................................................................................................................

17.2. Test result for stationary test: ..................................... db(A) at .....................................min-1

18. Additional sound emission provisions:

See manufacturer’s statement of compliance (attached)

19. In-use compliance reference data

19.1. Gear (i) or, for vehicles tested with non-locked gear ratios, the position of the gear selector chosen for the

test: ....................................................................................................................

19.2. Pre-acceleration length l : ......................................................................................... m PA

19.3. Vehicle speed at the beginning of the period of acceleration (average of 3 runs) for gear (i): ....................km/h

19.4. Sound pressure level L : ......................................................................................dB(A) wot(i)

20. Date of submission of vehicle for approval: ...........................................................................

21. Technical Service performing the approval tests:......................................................................

ELI: http://data.europa.eu/eli/reg/2025/2463/oj 13/23EN OJ L, 12.12.2025

22. Date of report issued by that Service: .................................................................................

23. Number of report issued by that Service: .............................................................................

24. Approval granted/extended/refused/withdrawn (2): ...................................................................

25. Position of approval mark on the motor cycle: ........................................................................

26. Place: ..................................................................................................................

27. Date: ..................................................................................................................

28. Signature: .............................................................................................................

29. The following documents, bearing the approval number shown above, are annexed to this communication:

Drawings, diagrams and plans of the engine and of the exhaust silencing system;

Photographs of the engine and of the exhaust or silencing system;

List of components, duly identified constituting the exhaust silencing system.

PART B NORESS for vehicle types approved according to UN Regulations Nos. 9 or 63 (Maximum format: A4 (210 × 297 mm))

Approval No.................................................. Extension No..................................................

1. Trade name or mark of the vehicle: ...................................................................................

2. Vehicle type: ...........................................................................................................

3. Manufacturer’s name and address: ....................................................................................

4. If applicable, name and address of manufacturer’s representative: ....................................................

(1) Distinguishing number of the country which has granted/extended/refused/withdrawn an approval (see approval provisions in the Regulation).

(2) Delete what does not apply.

14/23 ELI: http://data.europa.eu/eli/reg/2025/2463/ojEN OJ L, 12.12.2025